Lewisburg garage kit provides maximum capacity with two floors
of unobstructed storage area.
If you do not want to install an overhead garage door, check
the wall instead of garage door opening box and receive
wall framing and siding which closes in the opening.
Not a pole building! Built like your house
with wall studs 16” on center.
Lewisburg garage kits are prep-for-vinyl-siding: you can include
optional vinyl siding with your order, or buy vinyl siding locally.
Manufactured ‘I’ Joists provide a clear span for flexible storage
on the lower level while providing additional storage space
above. Manufactured ‘I’ Joists are straighter and stronger than
dimensional lumber. Loft floor rated for 40 lbs. per square
An optional stair package is available for convenient access
to the loft area. The stairs are 42" wide to aid in carrying
items to the loft area. Interior walls are included to enclose
Foundation by owner.
The upper gables are pre-built in 4’ wide sections with the
siding already applied. The gables are numbered so they can
be re-assembled for a perfect fit. Please note that you will need to help unload the pre-built gable ends.
Using the 2nd floor loft area as a work platform makes installing
the gables fast and easy.
The siding on the center panel is not cut, so you can install
the window size of your choice.
The spacious 2nd floor area provides a clear span for maximum
storage space with a generous 7’-8” height for headroom.
Perfect for game room or storage for those Where-do-I-put-it
The 2×8 trusses are pre-cut for precise field assembly. Typical
attic trusses only allow storage in the center, but our trusses
provide a clear span for maximum storage.
The 2×8 trusses are pre-cut for precise field assembly.
These trusses are Engineer Certified to withstand a 40 lbs/sf
roof load and a wind load of 90 mph. Trusses can be upgraded to meet 130 mph wind load for most areas of Florida. Check option box above.
Lewisburg cross section
Exterior walls …
Walls arrive K.D., field assembly required. Pre-cut wall studs
are spaced 16” on center and the bottom plate is treated. Exterior
siding is OSB (oriented stran board). Upper gable walls are shipped pre-built with
siding applied. Walls are designed to meet international building
codes of BOCA, IBC-IRC-2006 Edition. White pine trim is included
for the gable trim, fascia, door trim and corner trim. Trim
is unfinished, painting required. Includes nails.
Loft Floor …
Manufactured ‘I’ Joists spaced 16” o.c., covered with 3/4”
tongue-and- groove Structurwood flooring. ‘I’ joists
are shipped in one foot increments: field cut to exact length.
Nails and metal bridging included.
Roof System …
Pre-cut 2×8 trusses, 24” o.c. covered with 7/16” OSB. See optional
roof covering notes below.
Prepped for application of Vinyl siding ...
The Lewisburg is prep-for-vinyl siding. It includes OSB panels to which you attach vinyl siding. Purchase vinyl siding of your choice from a local home building center to match your home.
Window & door options …
An optional 28” × 38” double-hung window
comes in white finish with insulated glass and window grids
between the glass for easy cleaning. Also includes a pair of
vinyl raised panel paintable shutters.
An optional walk-in entry door gives better access:
- Pre-hung 9-lite walk-in door includes aluminum
threshold and lockset
- Windowless pre-hung 6-panel steel walk-in door
also includes threshold and lockset
Overhead garage door by owner.
Optional stair package …
Pre-cut stair stringers made from 1-3/4" thick laminated lumber.
Pre-cut stair treads and kicker boards. Includes wall framing
to enclose stairway.
Optional cupola …
Add the finishing touch with an attractive 30”×30”×51” roof
cupola. Constructed from weather-resistant pre-finished polyethylene,
this cupola not only beautifies but also improves air flow through
the building. Mix or match base and roof cap colors. Includes
weathervane in three design choices.